Designed by pro riders, mechanics and scientists, Peaty's Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket, yet leaves a minimal mess when removed.

Features

• An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.
• Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape's semi-transparent finish will illuminate the way.
• Our tape comes on 9meter and 50meter rolls in four different width options - 21mm, 25mm, 30mm and 35mm.
• One 9 meter roll will cover approximately:
  • 5 x 26" Rims.
  • 4 x 27.5" Rims.
  • 4 x 29" Rims.
  • 4 x 700c Rims.

  Instructions

  • Remove tyre and any old rim tape.
  • Clean and degrease rim thoroughly (nobody likes a dirty rim!).
  • Ensure rim is completely dry before application.
  • Starting at least 10cm before the valve hole, Press the tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
  • Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut.
  • Use a small spike to pierce the tape in the centre of the valve hole.
  • Remove dust cap and push valve through the valve hole.
  • Apply lock ring tightly by hand, ensuring there are no air gaps.
  • Refit tyre, add Peaty's Tubeless Sealant, inflate tyre.
  • Ride!.

  Manufacturer's Code: PT-PRJ9M21, PT-PRJ9M25, PT-PRJ9M30, PT-PRJ9M35

  Barcodes: 5060541580206, 5060541580213, 5060541580244, 5060541580220