Sold-Out
Lightweight Trail Protection with Koroyd® and MIPS® technology
Features
- Lightweight in-mould construction
- Koroyd panels in high impact areas provide increased energy absorption
- MIPS® Brain Protection System reducing multi-directional impacts
- Removable, adjustable visor offering a wide range of movement
- Large vents including top ‘air intake’ zone provide increased airflow
- One-handed micro adjust fit system with multiple anchor points for wide range of adjustment
- Fast wicking, quick dry, soft touch, removable padding
- Goggle friendly design with rear strap gripper
- Covered by Endura’s Crash Replacement Policy and Endura Product Guarantee
- Certified to CE EN1078:2012 + A1:2012 Standards
Specifications
Construction
- Polystyrene 50%
- Polycarbonate 25%
- Polypropylene 15%
- Nylon 5%
- Polyester 5%
What is Mips Technology?
The Mips safety system is designed to add protection against the rotational motion (or kinematics) transmitted to the brain from angled impacts to the head. Rotational motion is a combination of rotational energy (angular velocity) and rotational forces from angular acceleration that both affect the brain and increases the risk for minor and severe brain injuries. Mips’ added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain. Read More
We know from scientific research that the brain is particularly senstivie to rotation. In the event of an impact, the helmet technology provided by a Mips® safety system is intended to help reduce the impact of rotational energy to the head by enabling a relative movement between the head and helmet.
When such an impact occurs the forces the build up between the head and helmet are immense. These forces can be compared to the weight of up to 10 people sudddenly standing on your helmet. Under such high pressure, the friction between head and helmet makes it hard for the helmet to move– even if the straps are slightly loose or if the helmet doesn’t have a properly secure fit as recommended by the manufacturer. But a Mips® low-friction layer inside a helmet can still allow omni-directional movement of 10-15mm when that high load occurs.
Most helmets that are certified by industry-accepted safety standards are capable of reducing the energy of a straight, linear impact. But when it comes to angled impacts, which is the most common type of impact from crashes or falls, a Mips® safety system-equipped helmet can also help reduce harmful rotational energy.
Think about a fall on a slippery slope: If you fall and hit your head (or helmet), you will most likely continue in the same direction as before the fall. Alternatively, consider a similar fall on high-friction asphalt– a very different scenario. When your helmet hits the ground, there will most likely be a sudden stop and a rotation of the helmet. Mips intends to redirect that energy away from the head.
Size Chart
Manufacturer's Code: E1552BE/M-L, E1552BE/L-XL, E1552WH/S-M, E1552WH/L-XL, E1552WH/S-M, E1552BK/S-M, E1552BK/M-L, E1552BK/L-XL, E1552BE/S-M, E1552TO/S-M, E1552TO/M-L, E1552TO/L-XL, E1552CG/S-M, E1552CG/M-L, E1552CG/L-XL, E1552PO/S-M, E1552PO/M-L, E1552PO/L-XL
Barcodes: 5056286924030, 5056286924047, 5056286923996, 5056286924016, 5056286923996, 5056286923965, 5056286923972, 5056286923989, 5056286924023, 5056286953726, 5056286953733, 5056286953740, 5056286953757, 5056286953764, 5056286953771, 5056286953696, 5056286953702, 5056286953719
